skip to primary navigationskip to content
 

Windows 8 and 8.1

Configuring the UIS VPN for Windows 8 and 8.1

Before you begin, please ensure:

  • You know your Network Access Username - typically your CRSid (username) followed by "@cam.ac.uk".  For example, "xyz789@cam.ac.uk".
  • You have your Network Access Token - either written down, or displayed on the screen of an adjacent device.  This is a 16 character long password and is NOT the same as your University (Raven) password. You can find out your token by visiting the Network Access Token site.
  • If you have been advised to use a Managed VPN, rather than the general University VPN service, you will need the VPN server hostname.  Available VPNs and their server hostnames are listed on the Managed VPN page.

Please be aware that traffic over the VPN is recorded and logged, for security purposes

Setting up the VPN

  1. From the Start screen press the Windows key + W
  • Windows 8 - select Apps from the options below the search box
  • Windows 8.1 - select Everywhere from the drop down list
  • Search for then select Control Panel
  • From the View by drop down list (top right) select small icons
  • Select Network and Sharing Center
  • Select Set up a new connection or network
    View basic network information screen
  • Select Connect to a workplace
  • Select the Next button 
    Set up connection screen
  • Select Use my Internet connection (VPN) 
    Connect to a workplace 1
  • In the Internet address box enter vpn.uis.cam.ac.uk
    Alternatively, if you are using an institutional Managed VPN, enter the VPN server hostname here instead.
  • In the Destination name box enter Cambridge VPN
  • Tick Remember my credentials
  • Select the Create button
    Connect to a workplace 2
  • A dialog box will appear titled Creating the Connection
  • Click away from the Networks side bar to close it the setup is not complete
  • If the Network and Sharing Centerwindow is no longer open, press the Windows key + W
    • Windows 8 - Select Apps from the options below the search box
    • Windows 8.1 - select Everywhere from the drop down list
  • Search for and click on Control Panel
  • Select Network and Sharing Center
  • Select Change adapter settings 
    Network and Sharing Center pane
  • A new adapter, called Cambridge VPN, will now be present
  • Right click on the adapter and select Properties
  • Select the Security tab
  • Under the heading Type of VPN select IKEv2 from the drop down list
  • Under the heading Data encryption select Require encryption (disconnect if server declines)
  • Under the heading Authentication select Use Extensible Authentication Protocol (EAP)
  • Select the OK button 
    VPN Properties pane
  • Close any remaining Network Connections windows
  • Connecting

    1. To connect to the VPN press the Windows key + W and search for Network
    2. Select Connect to a network
    3. On the Networks bar select Cambridge VPN then the Connect button
    4. In the User name box enter your CRSid@cam.ac.uk (e.g. spqr321@cam.ac.uk)
    5. In the Password box enter your Network token, which you can get from https://tokens.csx.cam.ac.uk/
    6. Select the OK button
    7. On the Networks side bar Cambridge VPN should appear as Connected

    Disconnecting after use

    1. Disconnect from the VPN connection when your work is complete by pressing the Windows key + W and searching for Network
    2. Select Connect to a network
    3. On the Networks bar select Cambridge VPN then the Disconnect button